Automatic Circular Saw Cutting Machine

MODEL : EM 80 XS

This highly advanced CNC High-Speed metal cutting circular saw machine can cut large diameter from 20 to 80 mm. with possibility to cut any alloy steel materials with fast cycle time and high accuracy.

Immense level of automation on this machine allows it to run fully automatically with bar loader and robotics based unloading system.

About Machine

  • MITSUBISHI MAKE 7” (HMI) Human Machine Interface Panel with User Friendly & Easy to Operate Graphical Touch Screen
  • MITSUBISHI MAKE Advance High Speed Programmable Logic Control Unit
  • EXACUT MAKE Powerful Gear Head with Heavy Duty Gear Transmission With “0” Backless
  • EXACUT MAKE Gear Head with 50-170 rpm (Inverter Type)
  • Dynamic Cutting like Fast Approch Speed and Low Speed During Blade Entry
  • ROTOMOTIVE MAKE AC Main Spindle Motor 12.5 Hp / 10.0 KW
  • Spindle Nose Support Cutter with Fix Carbide Stabilising PAD for Cutter Diameter 285
  • MITSUBISHI MAKE AC SERVO Axis Drives With Higher Rapid Rate of Axis 20 M/min
  • PMI MAKE High Precision Ball Screws For Cutter & Feeder Axis
  • PMI MAKE High Precision Linear Motion Roller Type Guide ways For Cutter Axis
  • PMI MAKE High Precision Linear Motion Ball Type Guide ways For Feeder Axis
  • Directly Couppled Cutter & Feeder Axis
  • YUKEN MAKE Hydraulic Valves & Systems
  • Variable Vice Pressure for Master & Feeder Vice
  • (1st Time in INDIA) Pivote Type Floating Feeder Vice
  • JANATICS MAKE Pneumatic Systems
  • KENCO MAKE Micro Mist Coolant System with Special Spray Nozzle
  • CENLUB MAKE Centralised & Programmable Type Lubrication
  • MITSUBISHI MAKE Force Air Cooled With Controlled Temperature & Dust Free Electronics
  • MITSUBISHI MAKE Electrical Cabinet 420 V / 50 Hz with Fan Air Cooled
  • TPM Frendly Guarding Design
  • LINIX MAKE Individual Motorised Wire Brush to Clean Saw Blade
  • 6-Meter-Long Hydraulic Auto-Loader for Continuous Production
  • EXACUT MAKE Smart Auto-Loader Save 70 % Labour and Material Changeover Time
  • EXACUT MAKE Rear Side Auger Type Chip Conveyor with Trolley
  • SCHNEIDER MAKE 3 Tier Status Lamp with Buzzer
Cutting Capacity in Round Section :
Round With Material (Brass, Mild Steel, Alloy Steel) 10 – 82 mm
Round With Material (Stainless Steel) 10 – 72 mm
Cutting Capacity in Square Section :
Square With Material (Brass, Mild Steel, Alloy Steel) 10 – 68 mm
Square With Material (Stainless Steel) 10 – 58 mm
Feed :Rapid Traverse Cutter Axis 10 M / min
Rapid Traverse Feeder Axis 20 M / min
Ball Screw Cutter Axis Rolled 32 X 05 mm
Ball Screw Feeder Axis Ground 32 X 10 mm
Cutting Capacity with Auto Feed Length:Single Feed 10 To 750mm
Multi Feed Upto 9999mm
Remanant Length is 80 + Cutting Length
Main Spindle :Spindle Motor Power – 12.5 HP / 10.0 Kw
Spindle Nose For Cutter Bore – 32 MM
Spindle Range ( Blade Speed ) – 50 ~ 170 RPM
Blade Details :Pin Details – 4 X 11 X 63
Blade Size – 285 X 32 X T2.0
Teeth Selection – 60, 72, 80, 100, 120
Tooth Load Cutting Feed – 0.01 – 0.10 mm/tooth
Position Accuracy :
(Approx.) +/- 0.050mm
Dimension of Machine :(Approx.) (L x W x H) 2000 X 1700 X 1700 mm
Dimension of Loader :
(Approx.) Support 6 Meter Long Bar
Total Weight of Machine with Loader :
(Approx.) 3000 KG

All Specifications, Dimensions and Design Characteristics may Vary Due to Continuous Improvement